Routed Network

This lab went fast and furious as you can tell by Brad's "fingers of fury" configuring the routers to connect to the switches to create the subnets. we all then had to connect and check the connections by pinging other classmates. Using special Cisco cables we were able to connect the three routers and on the final router connect to the switch with an rj45 crossover cable. The subnets were as follows:

1) 140.20.0.0

2) 140.20.32.0

3) 140.20.64.0

4) 140.20.96.0

Had a few problems at first but with some tweaking to some encapsulation by the Cisco Guru, all went pingingly well.